Yeah, now, place a cable from your pc to port eth6 on the back of the unit and set your nic card IP settings to: If you can ping 8.8.8.8 go to next step, if you can not ping 8.8.8.8, plz retry your connections or steps 1-11Īfter you are able to ping 8.8.8.8 now type in "wget " - no quotes ![]() Install cat 5 cable to your internet router, and place the other end into eth0 on the back of the ciscoĪfter unit boots up try to ping 8.8.8.8 to see if you can get to the internet Install the USB drive you installed FINNIS onto in top USB slot, turn on cisco ASA applicnce and let boot up Hit F4 to save changes, Save Configuration and exit Open BIOS settings go to BOOT, Find ROMMON BOOT setting and HIT the space bar to set it to Disabled On the Cisco ASA5525-x appliance you need to remove the cover and install the VGA adapter and hook up to monitor for Video output Open Rufus and install finnix.iso to usb drive ![]() Optional SSD drive to insert in the front of the unit for extra space as the internal USB-SSD drive is only 4gbġ.open cover and find iBMC_Jtag_VGA_Conn1 This is a 15pin to vga adapter for video out to monitor Ebay Part= VGA Port HD15F Adapter to IDC16 12 Inch (From PC )ĭownload rufus = used to burn openwrt to usb stick Old Cisco ASA 5525-x security appliance, get the cheap one on ebayĢ cat 5 or cat 6 cables 5’ long with rj45 ends on each end Hello every one, here is a fun project if you have some old Cisco ASA hardware to breathe new life into!
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |